How to fix Samsung washing machine water leakage problem

If you are troubled by the leakage of the Samsung washing machine, and even after trying a lot, the leakage is still there, then you do not have to worry at all.

In this post, we will tell you how you can stop the leakage of your washing machine at home.

The problem of leakage in washing machines is a common problem, often we get to see this in washing machines and we think that this washing itself is bad, while the problem is not with the washing machine, the problem is with the connections of the washing machine.

There are many reasons which cause leakage of water from the washing machine. Here we have tried to discuss all the known causes one after another in detail.

We have also tried to provide the authorized solution for the rectification of the leakage problem.

Water leakage in top loading washing machine

You should never panic if you see any water leakage from the Samsung washing machine. In most cases, you can easily resolve the problem at home itself.

Check for the connections & others

  • Make sure the door is firmly closed.
  • Check the hose connections are tight enough.
  • Check the end of a drain hose is correctly inserted and secured to the drain facility.
  • Always use highly efficient detergent to prevent over-suds.
  • Over suds can cause water leakage from the door or back of the washing machine.

Level the washing machine

First of all, you should check the Samsung washing machine for the levelling. Most of the time water leakage starts if the washing machine is not placed on an even surface or is unbalanced.

  • Keep the washing machine on an even surface.
  • Adjust the levelling legs for accurate levelling.
  • You can use a level meter for more accuracy.
leveler
level the washing machine with leveling legs

Locate the source of leakage

  • Empty the washing machine.
  • Keep the washing machine from the wall.
  • Start the fill cycle.
  • Monitor it to find the source of leakage.
water leakage samsung washing machine

Repair the water supply hose

  • Check for the drips around the water supply hose at the rear of the washer.
  • If water is leaking from water hose connections.
  • Replace the water hose if it is broken or rusted.
  • Change the internal washer only if the water hose is fine.

Water leakage in front loading washing machine

Water leakage in front and top loading washing machine causes due to almost same reasons. But there are some additional things to do in the front loading washing machine to fix the leakage.

You can check the following things step by step to find and fix the leakage issue in your front-loading Samsung washing machine.

Find the water leakage spot

First of all, you need to find the water leakage location in your washing machine. Then try to find the cause of the water leakage after that you can fix it easily.

Water leakage can happen from the water hose connections on your washing machine. So first of all, you should always check the water supply hose and its connection for leakage.

You should look for damage inside the hose and its accessories like the internal washer (ring). If you find anything damaged, then you need to replace it.

find the water leakage place

Apart from that, you should check the drain hose is properly inserted and secured with the water supply tap. A loose or incorrectly installed hose might cause water leakage.

check drain hose connections

Check the door

  • Check if the door is closing properly.
  • Make sure the door seal is cleaned and undamaged.
  • Remove the obstruction which hinders it from closing properly.
  • Hairs & Lints stick on the seal of the door and cause water leakage.
  • If you see a lot of soap on the washer drum clean the door properly.
clean the soap from the door

Level the washing machine

First of all, you should check the Samsung washing machine is installed on a stable and level ground. Most of the time water leakage starts if the washing machine is not placed at an even surface or is unbalanced.

  • Keep the washing machine on an even surface.
  • Adjust the levelling legs for accurate levelling.
  • You can use a level meter for more accuracy.

Check all the hoses and connections

  • Make sure all connections are installed properly and tightly.
  • Check for the drips around the water supply hose at the rear of the washer.
  • If water is leaking from water hose connections.
  • Replace the water hose if it is broken or rusted.
  • Change the internal washer only if the water hose is fine.
  • Also, check the drain hose is installed correctly.

Drain hose location

Make sure the drain hose is suspended at least 18 inches high, but it must not be higher than 96 inches.

drain hose connection suggestion

Use high efficiency detergent

You should always use high efficiency or HE detergent and should not fill the detergent more than the max value as it can also cause water leakage.

use he detergent 1
  • Always use “HE” or high-efficiency detergent.
  • Fill detergent not more than max level.
  • Make sure the detergent box is properly closed.
dont overfill detergent

Clean the pump filter

You should always check and clean the pump filter in the front-loading washing machines. And it is really very important to clean the pump filter to fix the leakage issues in the washing machine.

sasmung washing machine debris filter.jpg
clean the filter
  • Turn off the washing machine.
  • Check the washing machine is level to the ground.
  • To level the washing machine, make sure it is placed on a plain surface.
  • If the ground surface is not plain, then adjust the leg length of the washing machine accordingly.

Inspect the drain hose

Important: Incorrect drain hose installation is the most common reason for drain issues, and service is rarely required.

  • Route the drain hose properly.
  • Clean the debris filter clogged/blocked with lint or dirt/dust.
  • You can use a toothbrush to clean the pump filter.
  • Straighten the drain hose all the way to the drain system. Also, ensure that it’s not clogged.
clean the pump filter

Clean the pump filter (debris filter) periodically to improve cleaning performance and help prevent odours. A clogged debris filter reduces the effectiveness of the draining system.


FAQs

Why is my Samsung washer leaking water from underneath?

Loose or improperly installed water hose connections and damaged hoses are the most common causes of water leakage in the washing machine.

The washing machine may also leak if it is placed on an uneven surface. So much sug formation in washing machines due to non-high efficient detergent can also lead to water leakage.

In front load washer blockage in the pump filter and damage in the front door seal can also cause water leakage.

How do I fix a leaking Samsung washing machine?

Water leakage in washing machines is a common issue and can be fixed easily at home in most cases. You can do the following checks to fix the leakage in Samsung washing machines:

Install the washing machine at an even surface and level it, using the levelling legs.
Check for water hose connections, and replace if damaged or broken.
Make sure all connections are installed properly and tightly.
Always use the “HE” high-efficiency detergents.
Also, make sure that the washing machine is not overloaded with Laundry.
Clean the pump filter in front-loading washing machines only.

Samsung washer dripping water from the top?

Broken and rusted water hoses can lead to water leakage near the hose washer. Most of the time water leakage occurs due to loose connections or damaged water hoses.

Many times water leakages start due to damage in the seal or washer of the hose. Installation of the washing machine on uneven surfaces also causes the washing machine to start leakage.

Also, use the “HE” high-efficiency detergents to avoid excessive formation of Suds inside the washing machine. Excessive Suds also cause water leakage in the washing machine.

Leave a Comment